Can a Bowling Ball Crack in Cold Weather?

Can a bowling ball crack in cold weather

Can a bowling ball crack in cold weather?

A bowling ball can crack when subject or exposed to an extremely cold weather. Asides weather conditions, a bowling ball will also crack when the coverings that make it up begin to expand or contract under the effect of heat (or cooling). That is why it is essential that you store your bowling balls and cool and dry places.

One more factor that can cause the cracking of a bowling ball is the sudden removal of the ball from a very hot room to a room at room temperature.

You’d see the surface of the ball taking an oily outlook immediately.

From all the factors listed above, you’d note that bowling balls will not crack unless they are subject to harsh conditions continually or over a long period of time.

And all of these things tie down to the mode of storage of the balls. Improper storage means they crack faster than they should.

How can you avoid these cracks though? What techniques or tips should you bear in mind?

1. The bowling ball shouldn’t be allowed to be kept in a place rich with moisture. That’s why you’ll always hear that you should keep your balls in cool and dry places.

Even while storing the balls; it is necessary that we keep them wrapped in towels.

2. It is also necessary to clean the balls as often as possible. Working with a bowling ball cleaner or gel will go a long way in extending the life of the ball.

What you need to do is apply some of the gel to the surface of the ball. From there, use a paper towel to napkin to spread the gel all over the surface.

When you are done cleaning, you’d realize that the surface of the ball feels tackier.

3. If your bowling ball has a shiny surface, a gel won’t be applicable for cleaning. You’d need an aerosol-based cleaner for that.

All you need to do is make a couple sprays across the surface of the ball and then, use a towel to wipe off the peeling grime.

The advantage of this process is that the ball moves smoothly down the bowling track.

4. When you leave your bowling ball in an extremely cold area for a very long time, there’s also a higher risk of it cracking.

Immediately take the ball into a room with room temperature and then, leave it there for about two to three days. After that, use a warm towel to wrap the ball’s body.

Then, you can then proceed to wash the ball with these—a towel, dish washing liquid, waterproof tape, and a bucket. Check out the steps described below;

  • Apply the waterproof tape across the finger grips of the ball. You don’t want water getting into them
  • Fill the bucket with hot water. The volume of the water should be such that it would totally keep the ball immersed when it is eventually put into it.
  • Add some of your dish washing liquid to the water and then, use a paddle to mix the liquid until you see bubbles.
  • Set your bowling ball into the water and then, allow it to remain that way for about twenty minutes. Meanwhile, during that timeframe, you have to make sure to spin the ball around.

That way, the cleaning cuts through all parts of the ball.

  • Carefully take the ball out of the water and then, dry it with a hand towel. If you still notice some grime-filled spots on your ball, you should repeat the soaking process.

Another way to know if the oil is completely gone is if you do not see any oily residue at the surface of the water.

  • Peel off the tape covering the grips and then, clean the area with the towel you used above. Make sure you have previously immersed the towel in soapy water.
  • When you are done, use a microfiber towel to rub the surface of the ball. This process brings back the ball’s shine.

Can a cracked bowling ball be fixed?

Let’s now see what you can do after the balls have cracked. The issue about cracked balls is that they never maintain the path through which you throw them across. As a result, you might end up losing your game.

These cracks could be repaired though, but it all depends on the magnitude of the crack. Scrapes and little cracks shouldn’t be too much of a hassle to repair. However, deep ones may render the ball useless.

  1. Sanding Your Ball

This procedure is great when the crack is slight. What you need to do is run sandpaper or sanding tool across the entire surface of the ball. While sanding though, you’d need to apply water to the surface of the ball.

That way, you get to eradicate dust from the surface as well as keep the paper fully pressed to the ball. While sanding your ball, you must ensure that you work with proper sandpapers.

The one with little grit will give the ball hitches as it moves down the bowling lane. For papers with higher grit, the ball begins to move with a skip or snap.

The best technique to utilize when sanding a ball is to run the paper at right-angles to the original sanding plane. That way, the ball can still make its smooth moves.

  1. Polishing

The good thing about polishing your ball is that it makes the outer surface of the ball appear even shinier. It also allows the ball move down the bowling lane without any hitch.

You also don’t have to worry about the lane being damaged with scratches. To keep the polish evenly coated around the ball, you should walk with a spinning tool.

You could also work with your hand though. You’d just have to ensure that you coat the surface evenly and completely.

  1. Sealing

This technique is what you need when you need to get rid of a small crack in your ball. Most of the equipment and tools that you’d need in this process are already included in tool kits for bowling ball repairs.

The tools usually come in form of sealants and accelerators. After the sealant has been used to completely fill the crack, the accelerator is then sprayed across the surface.

Either way, ensure that you closely follow all the instructions given to you by the manufacturer.

Related:

Please Share